Mazda CX-9 Grand Touring 2009 Manual page 436

2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
Fig. 33: Pulling End Of Interlock Cable
Courtesy of MAZDA MOTORS CORP.
5. Push the a 1.5 mm {0.059 in} round bar or similar into hole B and hole C of the lock unit until it passes
through.
6. Disconnect the brake switch connector.
7. Remove the brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION .)
8. Install a new brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION .)
CAUTION:
9. With the slider pin pressed, slide the lock unit to fix the lock unit hook into the bracket hole securely as
shown in the figure.
CAUTION:
2008 Mazda CX-9 Grand Touring
Do not connect the brake switch connector until the interlock
cable is installed.
Fig. 34: Identifying Hole B And Hole C Of Lock Unit
Courtesy of MAZDA MOTORS CORP.
Allowing the interlock cable to be bent or twisted during
installation can affect the lock unit operation.