2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
[AW6A-EL, AW6AX-EL].)
Fig. 25: Measuring Current Of Input/Turbine Speed Sensor
Courtesy of MAZDA MOTORS CORP.
12. Install the oil pipe. (See OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
13. Install the oil cooler. (See OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
14. Add ATF to the specified level. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
[AW6A-EL, AW6AX-EL].)
15. Install the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.7] .)
16. Connect the negative battery cable.
17. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-
EL].)
INPUT/TURBINE SPEED SENSOR REMOVAL/INSTALLATION [AW6A-EL,
AW6AX-EL]
WARNING:
1. Disconnect the negative battery cable.
2. Remove the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
[MZI-3.7] .)
3. Drain the ATF. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT [AW6A-EL,
AW6AX-EL].)
4. Remove the oil cooler.
5. Remove the oil pipe. (See OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
2008 Mazda CX-9 Grand Touring
A hot transaxle and ATF can cause severe burns. Turn off the engine
and wait until then are cool before replacing the ATF.