Mazda CX-9 Grand Touring 2009 Manual page 702

2008 BRAKES Dynamic Stability Control/Roll Stability Control - Mazda CX-9
Fig. 7: Identifying DSC/RSC HU/CM Components & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
DSC/RSC HU/CM CONNECTOR REMOVAL NOTE
1. Remove the DSC/RSC HU/CM connector using the following procedure:
1. Press down the lock lever while pressing the upper tab to release the lock.
2. Press down the lock lever and lock it using the lower tab.
3. Remove the DSC/RSC HU/CM connector by pulling it in the direction of the arrow.
Fig. 8: View Of DSC/RSC HU/CM Connector
Courtesy of MAZDA MOTORS CORP.
BRAKE PIPE REMOVAL NOTE
1. Place an alignment mark on the brake pipe and DSC/RSC HU/CM.
2008 Mazda CX-9 Grand Touring