OUTPUT SHAFT DISASSEMBLY NOTE
1. Remove the coupling unit from the SST.
2. Install the coupling unit to the press as shown, and remove the output shaft together with the coupling
unit.
3. Install the companion flange to the output shaft.
Fig. 15: Installing Coupling Unit
Courtesy of MAZDA MOTORS CORP.
4. Secure the companion flange using the SST , and remove the bolts.
5. Remove the output shaft.
Fig. 16: Removing Companion Flange Bolts
Courtesy of MAZDA MOTORS CORP.
BEARING DISASSEMBLY NOTE
1. Remove the bearing using the SSTs and a press.
Substitution SST
49 S033 108
Outer diameter: 33-55 mm {1.30-2.16 in}
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE All Wheel Drive (AWD) - Mazda CX-9