Mazda CX-9 Grand Touring 2009 Manual page 130

PASSENGER-SIDE AIR BAG MODULE
WARNING:
1. Remove the passenger-side air bag module.
(See PASSENGER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)
2. Install the bolts to the passenger-side air bag module.
Fig. 53: Identifying Bolts And Passenger-Side Air Bag Module
Courtesy of MAZDA MOTORS CORP.
3. Connect the SSTs (Adapter harness) to the passenger-side air bag module as shown in the figure.
Fig. 54: Connecting SST To Passenger-Side Air Bag Module
Courtesy of MAZDA MOTORS CORP.
4. Place the padded surface of the passenger-side air bag module facing the center of the tire as shown in the
figure. To secure the air bag module to the tire wheel, wrap a wire (cross section 1.25 mm
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
The passenger-side air bag module is a dual inflator type. If one
inflator is forced to operate (deploy), the other may operate (deploy)
accidentally. To prevent injury while disposing of the air bag
module, make sure to operate (deploy) both passenger-side air bag
module inflators simultaneously, following the procedure below.
2 2
{0.002 in }