Mazda CX-9 Grand Touring 2009 Manual page 392

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
7. Using the SST and a hammer, tap a new oil seal so that the specified oil seal position is obtained.
Substitution SST
49F027 009
Outer diameter: 76.8 mm {3.02 in}
Plate thickness: 2 mm {0.08 in} or more
8. Install the joint shaft. (2WD) (See JOINT SHAFT REMOVAL/INSTALLATION [2WD] .)
9. Install the drive shaft (right side). (See FRONT DRIVE SHAFT REMOVAL/INSTALLATION .)
10. Add ATF to the specified level. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
[AW6A-EL, AW6AX-EL].)
Fig. 82: Tapping Oil Seal
Courtesy of MAZDA MOTORS CORP.
11. Connect the negative cable.
12. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-
EL].)
2008 Mazda CX-9 Grand Touring
Fig. 81: Removing Oil Seal
Courtesy of MAZDA MOTORS CORP.