Fig. 15: Identifying Side Air Bag Module, Connector & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
15. Using a flathead screwdriver, pry out the connector stopper plate.
16. Disconnect the connector.
17. Install in the reverse order of removal.
18. Turn the ignition switch to the ON position.
19. Verify that the air bag system warning light illuminates for approx. 6 s and goes out.
If the air bag system warning light does not operate normally, refer to the on-board diagnostic
system (air bag system) and perform inspection of the system. (See FLOWCHART .)
Fig. 16: Prying Out Connector Stopper Plate Using Screwdriver
Courtesy of MAZDA MOTORS CORP.
CURTAIN AIR BAG MODULE REMOVAL/INSTALLATION
WARNING:
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
Handling the air bag module improperly can accidentally deploy the
air bag module, which may seriously injure you. Read the air bag
system service warnings and cautions before handling the air bag