2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Fig. 86: Identifying Oil Cooler & Oil Pipe
Courtesy of MAZDA MOTORS CORP.
6. Remove the control valve body cover installation bolt.
CAUTION:
7. Using a plastic hammer, tap the control valve body cover to remove it.
CAUTION:
NOTE:
2008 Mazda CX-9 Grand Touring
Do not damage the fitting surface of the transaxle case and the
control valve body cover.
Do not deform the control valve body cover.
Fig. 87: Locating Control Valve Body Cover Bolt
Courtesy of MAZDA MOTORS CORP.
Be careful not to damage the solenoid valves and connectors.
Do not pull the wiring harnesses when removing the connector.
Disconnect the solenoid connector according to the following
procedure: