2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
CAUTION:
8. Install the SST to the position where the transaxle stud bolts were removed.
Fig. 11: Identifying SST And Transaxle Position
Courtesy of MAZDA MOTORS CORP.
9. Remove the control valve body cover installation bolt.
CAUTION:
2008 Mazda CX-9 Grand Touring
When installing the SST to the transaxle, use bolts (M12x1.25)
with a thread length of 90 mm {3.54 in}.
Fig. 10: Identifying SST
Courtesy of MAZDA MOTORS CORP.
Do not damage the fitting surface of the transaxle case and the
control valve body cover.
Do not deform the control valve body cover.