Mazda CX-9 Grand Touring 2009 Manual page 383

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
1. Install the right rear shaft of the SST to the bolt of the right shock absorber shown in the figure.
2. Install the left rear shaft of the SST to the bolt of the left shock absorber (Identical position to the
right side).
Fig. 64: View Of Right Rear Shaft Of SST
Courtesy of MAZDA MOTORS CORP.
3. Install the left/right front shaft of the SST with front foot No.2 to the bolt shown in the figure.
4. Adjust the positions of the SST side bars so that they are the same height (left and right) and
horizontal.
5. Make sure each joint is securely tightened.
Fig. 65: View Of Left/Right Front Shaft Of SST
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring