Mazda CX-9 Grand Touring 2009 Manual page 523

CAUTION:
NOTE:
22. Move the power brake unit to the vehicle front where the power brake unit fork does not interfere with
the brake pedal arm. dashboard
23. Remove the brake pedal. member
Fig. 8: Identifying Dashboard Member & Locator Pin
Courtesy of MAZDA MOTORS CORP.
BRAKE SWITCH INSTALLATION NOTE
1. Inspect the brake pedal. (See BRAKE PEDAL INSPECTION.)
2. With the brake pedal fully released, insert a new brake switch into the installation hole on the lock unit.
3. Secure the brake switch by turning it clockwise 45°.
Fig. 9: Identifying Brake Switch & Lock Nut
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Conventional Brake System - Mazda CX-9
If the dashboard is moved towards the vehicle rear excessively,
the wiring harness could be damaged. Mark the position and
verify the distance when moving the dashboard.
When verifying the position of the dashboard member, verify visually
with the locator pin from the underside of the dashboard.