Mazda CX-9 Grand Touring 2009 Manual page 387

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Courtesy of MAZDA MOTORS CORP.
2. Tighten the bolts on the No.1 engine mounting bracket in the order of A, B.
Tightening torque
93.1-116.6 N.m {9.50-11.8 kgf.m, 68.7-85.9 ft.lbf}
Fig. 73: Identifying Bolts On No.1 Engine Mounting Bracket
Courtesy of MAZDA MOTORS CORP.
3. Tighten the No.1 engine mount bolt C at the specified torque.
Tightening torque
93.1-116.6 N.m {9.50-11.8 kgf.m, 68.7-85.9 ft.lbf}
Fig. 74: Identifying No.1 Engine Mount Bolt
Courtesy of MAZDA MOTORS CORP.
TORQUE CONVERTER NUTS INSTALLATION NOTE
1. Align the holes by turning the torque converter.
2. Insert a screwdriver through the converter housing service hole, and lock the drive plate.
2008 Mazda CX-9 Grand Touring