Mazda CX-9 Grand Touring 2009 Manual page 45

DIAGNOSTIC PROCEDURE
DTC B1055, B1996, B1997, B1998, B1999 DIAGNOSTIC PROCEDURE
STEP
INSPECT PASSENGER-SIDE SIDE AIR BAG
MODULE
Using the M-MDS, verify the following
PID/DATA monitor.
1
(See PID/DATA MONITOR TABLE.)
RES_SAB_P
Is the resistance of the passenger-side side air
bag module normal?
Resistance: 1.0-9.7 ohms
INSPECT PASSENGER-SIDE SIDE AIR BAG
MODULE CONNECTOR
WARNING:
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
INSPECTION ACTION
Replace the SAS control module. (See
Yes SAS CONTROL MODULE
REMOVAL/INSTALLATION .)
No Go to the next step.
Yes Replace the air bag wiring harness.