Mazda CX-9 Grand Touring 2009 Manual page 310

2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
E M10 x 1.25
72. Tighten the bolts.
Tightening torque
A, B, C: 23.5 - 35.3 N.m {2.4 - 3.5 kgf.m, 17.4 - 26.0 ft.lbf}
D, E: 29.4 - 41.2 N.m {3.0 - 4.2 kgf.m, 21.7 - 30.3 ft.lbf}
CAUTION:
73. Install the input/turbine speed sensor to the transaxle case.
Tightening torque 3.9 - 6.9 N.m {40 - 70 kgf.cm, 26 - 60 in.lbf}
Fig. 272: Locating Input/Turbine Speed Sensor
Courtesy of MAZDA MOTORS CORP.
74. Apply ATF to a new gasket as shown in the figure.
75. Install the gasket to the coupler component.
CAUTION:
76. Install a new O-ring to the coupler component.
CAUTION:
2008 Mazda CX-9 Grand Touring
40 {1.57}
Do not damage the input/turbine speed sensor.
Do not apply ATF to the O-ring.
Do not apply too much force to the coupler component.
Do not damage the coupler component.