Fig. 19: Identifying Front Heater Pipe & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
10. Disconnect the brake pipe (DSC/RSC HU/CM side) as shown in the figure.
11. Remove in the order indicated in the table.
12. Install in the reverse order of removal.
13. After installation, add brake fluid, bleed the air, and inspect for fluid leakage. (See AIR BLEEDING.)
14. Inspect the brake pedal. (See BRAKE PEDAL INSPECTION.)
Fig. 20: Identifying Brake Pipe & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BRAKES Conventional Brake System - Mazda CX-9