Mazda CX-9 Grand Touring 2009 Manual page 446

FUEL-FILLER LID ADJUSTMENT
1. Measure the gap and height difference between the fuel-filler lid and the body.
2. Loosen the fuel-filler lid installation bolts and adjust the fuel-filler lid.
Clearance
a: 1.7-3.7 mm {0.07-0.14 in}
b:-0.5-1.5 mm {-0.01-0.05 in}
3. Tighten the bolts.
Fig. 9: Measuring Gap And Height Difference Between Fuel-Filler Lid And Body
Courtesy of MAZDA MOTORS CORP.
FRONT BUMPER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the clip of the front over fender and put aside the front bumper.
Fig. 10: Removing Clip Of Front Over Fender
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Body Panels - Mazda CX-9