Mazda CX-9 Grand Touring 2009 Manual page 425

2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
8. Insert the a 1.5 mm {0.059 in} round bar or similar into hole A with the slider pin fully pushed in.
Fig. 9: Identifying Hole A And Slider Pin
Courtesy of MAZDA MOTORS CORP.
9. Fully pull the end of the interlock cable.
Fig. 10: Pulling End Of Interlock Cable
Courtesy of MAZDA MOTORS CORP.
10. Push the a 1.5 mm {0.059 in} round bar or similar into hole B and hole C of the lock unit until it passes
through.
11. Disconnect the brake switch connector.
12. Remove the brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION .)
13. Install a new brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION .)
CAUTION:
2008 Mazda CX-9 Grand Touring
Do not connect the brake switch connector until the interlock
cable adjustment is completed.