Mazda CX-9 Grand Touring 2009 Manual page 454

Fig. 22: Identifying Rear Over Fender Lower And Rear Bumper Fascia With Nuts
Courtesy of MAZDA MOTORS CORP.
FRONT FENDER PANEL REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Windshield wiper arm and blade (See WINDSHIELD WIPER ARM AND BLADE
REMOVAL/INSTALLATION )
2. Side cowl grille (See COWL GRILLE REMOVAL/INSTALLATION )
3. Front over fender (See OVER FENDER REMOVAL/INSTALLATION )
4. Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION)
5. Front combination lights (See FRONT COMBINATION LIGHT
REMOVAL/INSTALLATION )
6. Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION ) '
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
Fig. 23: Identifying Removing Sequence Of Front Fender Panel Components & Torque
Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Body Panels - Mazda CX-9