Mazda CX-9 Grand Touring 2009 Manual page 634

3. Remove the clips securing the wiring harness shown in the figure and set the wiring harness out of the
way.
Fig. 8: Identifying Rear Door Module And Clip
Courtesy of MAZDA MOTORS CORP.
4. Remove screws and fastener.
5. Remove the rear door module.
6. Install in the reverse order of removal.
Fig. 9: Identifying Rear Door Module With Screws And Fastener
Courtesy of MAZDA MOTORS CORP.
LIFTGATE REMOVAL/INSTALLATION
WARNING:
CAUTION:
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Doors and Liftgate - Mazda CX-9
When removing the stay damper, serious injury may occur if the stay
damper is removed without supporting the liftgate. Always perform
the procedure with at least another person.
If replacing the rear window glass, leave the power liftgate (PLG)
unoperated for two days after the rear Window glass installation. If
the power liftgate (PLG) is operated automatically with the sealant
not hardened after the rear window glass installation, the liftgate may