2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Outer diameter: 70-76 mm {2.76-2.99 in}
Inner diameter: 68.2 mm {2.69 in} or more
Plate thickness: 1 mm {0.04 in} or more
Fig. 150: Installing Tapered Roller Bearing To Center Support
Courtesy of MAZDA MOTORS CORP.
2. Using a flathead screwdriver, install the hole snap ring to the counter drive gear.
Fig. 151: Installing Hole Snap Ring To Counter Drive Gear
Courtesy of MAZDA MOTORS CORP.
3. Using the old bearing race and the steel plate as shown in the figure, install the new bearing race outer to
the counter drive gear.
2008 Mazda CX-9 Grand Touring