Mazda CX-9 Grand Touring 2009 Manual page 877

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
1. Select "Module Tests".
2. Select "PCM".
3. Select "DataLogger".
Fig. 11: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
3. Select the simulation items from the PID table.
4. Perform the simulation function, inspect the operations for each parts.
If there is no operation sound from the relay, motor, and solenoid after the simulation function
inspection is performed, it is possible that there is an open or short circuit in the wiring harness,
relay, motor or solenoid, or sticking and operation malfunction.
AFTER REPAIR PROCEDURE [MZI-3.7]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "PCM".
4. Select "Retrieve CMDTCs".
2008 Mazda CX-9 Grand Touring