Mazda CX-9 Grand Touring 2009 Manual page 647

Fig. 21: PLG Touch Sensor - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
POWER LIFTGATE (PLG) FRONT SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the dashboard under cover. (Driver's side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
3. Remove the hood release lever. (See HOOD LATCH AND RELEASE LEVER
REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
Fig. 22: Identifying PLG Front Switch & Connector
Courtesy of MAZDA MOTORS CORP.
5. Install in the reverse order of removal.
POWER LIFTGATE (PLG) FRONT SWITCH INSPECTION
1. Verify that the continuity between the PLG front switch terminals is as indicated in the table.
If not as indicated in the table, replace the PLG front switch.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Doors and Liftgate - Mazda CX-9