2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Fig. 281: Identifying TFT Sensor With Lock Plate And Bolt
Courtesy of MAZDA MOTORS CORP.
86. Connect the solenoid connectors, VSS connector and the input/turbine speed sensor connector.
87. Connect the coupler component to the clamps.
NOTE:
Fig. 282: Identifying Coupler Component And Clamps
Courtesy of MAZDA MOTORS CORP.
88. Clean sealant and oil off the contact surface of the transaxle case with the control valve body cover and
the bolt holes.
NOTE:
89. Clean oil off the contact surface of the new control valve body cover with the transaxle case.
2008 Mazda CX-9 Grand Touring
Completely remove sealant and oil with white gasoline or similar.
Completely remove oil with white gasoline or similar.