Mazda CX-9 Grand Touring 2009 Manual page 404

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Fig. 103: Identifying Connector Of VSS & Input/Turbine Speed Sensor
Courtesy of MAZDA MOTORS CORP.
CAUTION:
6. Apply ATF to a new O-ring and install it on the TFT sensor.
7. Install the TFT sensor with the lock plate and a bolt to the control valve body component as shown in the
figure.
Tightening torque
8-12 N.m {82-122 kgf.cm, 72-105 in.lbf}
2008 Mazda CX-9 Grand Touring
If the control valve body cover is installed with the wiring harness
overlapped, the wiring harnesses may be pinched between the co
valve body causing the wiring harnesses to be damaged. Therefo
that the wiring harnesses are not overlapped when installing the
valve body cover.
Fig. 104: Precaution Of Control Valve Body Cover
Courtesy of MAZDA MOTORS CORP.