Mazda CX-9 Grand Touring 2009 Manual page 409

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
Fig. 111: Tapping Oil Seal
Courtesy of MAZDA MOTORS CORP.
8. Perform the mechanical system test. (See MECHANICAL SYSTEM TEST [AW6A-EL, AW6AX-
EL].)
TORQUE CONVERTER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL]
1. Remove the transaxle. (See AUTOMATIC TRANSAXLE REMOVAL/INSTALLATION [AW6A-
EL, AW6AX-EL].)
CAUTION:
2. Remove the torque converter, and immediately turn it so that the hole faces upward. This will help to
keep any remaining fluid from spilling.
3. Drain any ATF remaining in the torque converter.
4. Using a flathead screwdriver, position the drive gear on the oil pump component in the center.
5. Install the torque converter to the transaxle.
Fig. 112: Identifying Torque Converter & Transaxle
2008 Mazda CX-9 Grand Touring
The oil seal is easily damaged by the sharp edges of the torque
converter splines. Do not let the splines contact the oil seal.
Do not drop the torque converter.
Do not pinch fingers.