DETECTION
CONDITION
POSSIBLE
CAUSE
DIAGNOSTIC PROCEDURE
DTC B104B, B104E, B1051, U2017 DIAGNOSTIC PROCEDURE
STEP
INSPECT DRIVER-SIDE SIDE AIR BAG
SENSOR NO.1 CONNECTOR
WARNING:
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner seat belts,
1
which may seriously injure you. Read the
service warnings and cautions before
handling the air bag system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
performing an inspection, always follow the inspection procedure.
Malfunction in wiring harness between driver-side side air bag sensor No.1 and SAS
control module
Malfunction in driver-side side air bag sensor No.1 circuit
Open or short circuit in wiring harness between driver-side side air bag sensor No.1
Driver-side side air bag sensor No.1 malfunction
INSPECTION
and SAS control module
SAS control module malfunction
Yes Replace the air bag wiring harness.
ACTION