Mazda CX-9 Grand Touring 2009 Manual page 382

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
2. Remove the No.1 engine mount, No.1 engine mount bracket and the front crossmember as a single unit.
(See FRONT CROSSMEMBER REMOVAL/INSTALLATION .)
Fig. 62: Identifying No.1 Engine Mount
Courtesy of MAZDA MOTORS CORP.
NO.4 ENGINE MOUNT BRACKET REMOVAL NOTE
1. Install the SST using the following procedure.
CAUTION:
NOTE:
2008 Mazda CX-9 Grand Touring
Refer to the SST instruction manual for the basic handing
procedure.
When installing the SST , adjust the position of each shaft so that
they do not interfere with the vehicle body.
Fig. 63: Identifying No.4 Engine Mount Bracket
Courtesy of MAZDA MOTORS CORP.