Mazda CX-9 Grand Touring 2009 Manual page 871

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Courtesy of MAZDA MOTORS CORP.
3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS
screen.
4. Retrieve the pending trouble codes according to the directions on the M-MDS screen.
FREEZE FRAME PID DATA ACCESS PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "PCM".
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "Self Test".
Fig. 7: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
3. Then, select the "Retrieve CMDTCs" and perform procedures according to directions on the M-MDS
screen.
4. Retrieve the freeze frame PID data according to the directions on the M-MDS screen.
ON-BOARD SYSTEM READINESS TESTS ACCESS PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Powertrain".
2008 Mazda CX-9 Grand Touring