2008 BRAKES Symptom Troubleshooting (DSC/RSC) - Mazda CX-9
INSPECT DTC IN DSC/RSC HU/CM
Inspect DTC for the ON-BOARD
1
DIAGNOSTIC SYSTEM.
Have DTCs been stored in memory?
VERIFY THAT EACH SENSOR IS
INSTALLED
2
Are the combined sensor and steering
angle sensor securely installed?
VERIFY EACH SENSOR IS
INITIALIZED
3
Was initialized performed after
replacement of the DSC/RSC HU/CM
or combined sensor?
VERIFY THAT TIRE CONDITION
Verify tire condition for following:
Air pressure
4
Wear
Grip level (different by four wheels)
Are tires conditions okay?
VERIFY SUSPENTION PART
Verify vehicle posture.
5
Is there an inclination in the posture of
the vehicle right and left, left and rear?
2008 Mazda CX-9 Grand Touring
Perform the applicable DTC inspection (See
Yes
ON-BOARD DIAGNOSIS [DSC/RSC] .)
No
Yes Go to the next step.
No
Yes Go to the next step.
No
Yes Go to the next step.
No
Inspect the following suspension part:
Yes
No
Go to the next step.
Install the suspect sensor securely.
Perform initialization procedure. (See
DSC/RSC SENSOR INITIALIZATION
PROCEDURE .)
Adjust, repair or replace suspect tire.
Shock absorber
Stabilizer
Find malfunctioning part according to
"intermittent concern troubleshooting".