Mazda CX-9 Grand Touring 2009 Manual page 140

Fig. 73: Identifying Activation Switch
Courtesy of MAZDA MOTORS CORP.
PRE-TENSIONER SEAT BELT
1. Remove the pre-tensioner seat belt.
(See FRONT SEAT BELT REMOVAL/INSTALLATION .)
2. Connect the SST (Adapter harness) to the pre-tensioner seat belt as shown in the figure.
Fig. 74: Connecting SST To Pre-Tensioner Seat Belt
Courtesy of MAZDA MOTORS CORP.
3. Put the pre-tensioner seat belt inside the tire and secure it to the tire by wrapping a wire (cross section of
2
1.25 mm {0.002 in
WARNING:
2008 Mazda CX-9 Grand Touring
2008 RESTRAINTS Air Bag System - Mazda CX-9
2
} or more) through the tire and the bolt installation holes at least 4 times .
If the pre-tensioner seat belt is not properly installed to the tire,
serious injury may occur when the pre-tensioner part is
operated (deployed). When installing the pre-tensioner seat belt
to the tire, make sure the pre-tensioner part is inside the tire.
Fig. 75: Placing Pre-Tensioner Seat Belt Inside Tire
Courtesy of MAZDA MOTORS CORP.