Mazda CX-9 Grand Touring 2009 Manual page 617

Fig. 38: Identifying SST
Courtesy of MAZDA MOTORS CORP.
6. Place the SST on the surface plate and set the dial indicator to zero.
Fig. 39: Placing SST On Surface Plate
Courtesy of MAZDA MOTORS CORP.
7. Set the SST as shown in the figure.
8. Place the measuring probe of the dial indicator so that it contacts the place where the side bearing is
installed in the carrier. Then measure the left and right side of the lower position.
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLES Differential - Mazda CX-9