2005-08 TRANSMISSION Automatic Transaxle Overhaul (AW6A-EL) - CX-7, CX-9 & Mazda 6
Fig. 178: Identifying Clutch Balancer, Return Spring And Spring Retainer
Courtesy of MAZDA MOTORS CORP.
7. While pushing the C2 clutch piston by hand, apply compressed air into the oil passage as shown in the
figure and remove the C2 clutch piston from the intermediate shaft.
Air pressure
392 kPa {4.0 kgf/cm
NOTE:
Fig. 179: Applying Compressed Air Into Oil Passage
Courtesy of MAZDA MOTORS CORP.
8. Remove the O-rings from the intermediate shaft.
2008 Mazda CX-9 Grand Touring
2
, 57 psi}
When applying compressed air, block the three oil passages of the
intermediate shaft as shown in the figure.