Mazda CX-9 Grand Touring 2009 Manual page 876

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
VT DIFF1 (RH)
Difference between target and actual valve timing
VT DIFF2
(LH)
VT DUTY1 Oil control valve duty value (RH)
VT DUTY2 Oil control valve duty value (LH)
DIAGNOSTIC MONITORING TEST RESULTS ACCESS PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Powertrain".
2. Select "OBD Test Modes".
3. Select "Mode 6 On-Board Test Results".
When using the PDS (Pocket PC)
1. Select "OBDII Modes".
2. Select "Mode 6 On-Board Test Results".
Fig. 10: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
3. Verify the PID data according to the directions on the screen.
SIMULATION FUNCTION PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "DataLogger".
2. Select "Modules".
3. Select "PCM".
When using the PDS (Pocket PC)
2008 Mazda CX-9 Grand Touring
°
°
%
%