Mazda CX-9 Grand Touring 2009 Manual page 713

2008 BRAKES Dynamic Stability Control/Roll Stability Control - Mazda CX-9
4. Remove the rear scuff plate inner. (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
5. Remove the third-row seat belt lower anchor installation bolt. (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
6. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
7. Remove in the order indicated in the table.
8. Install in the reverse order of removal.
Fig. 19: Identifying Rear ABS Wheel Speed Sensor Connector, Rear ABS Wheel Speed Sensor, Bolt
& Torque Specifications
Courtesy of MAZDA MOTORS CORP.
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION [AWD]
1. Remove the trunk box. (See TRUNK BOX REMOVAL/INSTALLATION .)
2. Remove the seat side box. (See SEAT SIDE BOX REMOVAL/INSTALLATION .)
3. Remove the third-row seat. (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
4. Remove the rear scuff plate inner. (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
5. Remove the third-row seat belt lower anchor installation bolt. (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
6. Remove the trunk side trim. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
7. Remove in the order indicated in the table.
2008 Mazda CX-9 Grand Touring