Fig. 6: Identifying Front Door Module And Clip
Courtesy of MAZDA MOTORS CORP.
5. Remove screws and fastener.
6. Remove the front door module.
7. Install in the reverse order of removal.
Fig. 7: Identifying Front Door Module With Screws And Fastener
Courtesy of MAZDA MOTORS CORP.
REAR DOOR MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Inner sail garnish (See INNER SAIL GARNISH REMOVAL/INSTALLATION ).
2. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
3. Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION .)
4. Rear door glass (See REAR DOOR GLASS REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Doors and Liftgate - Mazda CX-9