2008 ENGINE PERFORMANCE Emission System (MZI-3.7) - Mazda CX-9
3. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to
prevent it from scratches or dirt.
Fig. 29: Identifying Quick Release Connector And Retainer
Courtesy of MAZDA MOTORS CORP.
TYPE B REMOVAL NOTE
NOTE:
If the quick release connector is removed, replace the retainer with a new
one.
1. Push the retainer.
NOTE:
2. Pull the connector side and disconnect the quick release connector.
3. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to
prevent it from scratches or dirt.
Fig. 30: Identifying Quick Release Connector And Retainer
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
The quick release connector can be removed by pushing the center
of the retainer tabs.
The retainer is attached to the pipe even after the connector is
disconnected.