4. Remove the bolt.
5. Remove the clip.
6. Remove the PLG buzzer.
7. Install in the reverse order of removal.
Fig. 28: Identifying PLG Buzzer, Connector & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
POWER LIFTGATE (PLG) BUZZER INSPECTION
1. Connect the battery to the PLG buzzer and check if the PLG buzzer sounds.
When the PLG buzzer does not sound, replace it.
Fig. 29: PLG Buzzer - Circuit Diagram
Courtesy of MAZDA MOTORS CORP.
STAY DAMPER DISPOSAL
NOTE:
The gas in the stay damper is colorless, odorless, and non-toxic.
1. Wear protective eye wear.
2. Lay the stay damper flat.
3. Saw through the stay damper body using hacksaw.
4. Allow the gas to escape from the stay damper.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Doors and Liftgate - Mazda CX-9