Mazda CX-9 Grand Touring 2009 Manual page 426

2008 TRANSMISSION Automatic Transaxle Shift Mechanism - Mazda CX-9
14. Install the lock unit to the bracket. (See SELECTOR LEVER COMPONENT
REMOVAL/INSTALLATION.)
15. Rotate the slider pin to release the lock and verify that it slides freely.
16. Verify that the slider pin contacts the brake pedal stopper rubber and rotate the slider pin to lock.
Fig. 12: Inspecting Slider Pin Contacts Brake Pedal Stopper Rubber
Courtesy of MAZDA MOTORS CORP.
17. Install the interlock cable end to the interlock link on the selector lever.
18. Fit the interlock cable in the U-groove in the selector lever base plate and install the clip.
Fig. 13: Identifying Interlock Cable And Clip Of Selector Lever Base Plate
2008 Mazda CX-9 Grand Touring
Fig. 11: Identifying Hole B And Hole C Of Lock Unit
Courtesy of MAZDA MOTORS CORP.