Mazda CX-9 Grand Touring 2009 Manual page 75

2008 RESTRAINTS On-Board Diagnostic (Restraints) - Mazda CX-9
Remove the METER 10 A fuse.
2
Is the fuse normal?
INSPECT BATTERY
3
Measure the battery positive voltage.
Is the voltage 9 V-16 V?
INSPECT WIRING HARNESS BETWEEN
BATTERY AND PAD INDICATOR
Turn the ignition switch to the ON position.
4
Measure the information display connector
terminal E voltage.
Is the voltage 9 V or more?
INSPECT WIRING HARNESS BETWEEN PAD
INDICATOR AND SAS CONTROL MODULE
WARNING:
Handling the air bag system components
improperly can accidentally deploy the air
bag modules and pre-tensioner front buckles,
which may seriously injure you. Read the
service warnings before handling the air bag
system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS .)
(See AIR BAG SYSTEM SERVICE
CAUTIONS .)
5
Turn the ignition switch to the LOCK position.
Disconnect the negative battery cable and wait
for 1 min or more.
Remove the column cover. (See COLUMN
COVER REMOVAL/INSTALLATION .)
Disconnect the clock spring connector. (See
COMBINATION SWITCH
REMOVAL/INSTALLATION .)
Remove the glove compartment. (See GLOVE
COMPARTMENT
REMOVAL/INSTALLATION .)
Disconnect the passenger-side air bag module
connector. (See PASSENGER-SIDE AIR
2008 Mazda CX-9 Grand Touring
step.
No Replace the fuse.
Yes Go to the next step.
Battery is malfunctioning Inspect the
No
charge/discharge system.
Yes Go to the next step.
Repair the wiring harness between the
No
battery and information display.
Yes Go to the next step.