Mazda CX-9 Grand Touring 2009 Manual page 878

2008 ENGINE PERFORMANCE On-Board Diagnostic (MZI-3.7) - Mazda CX-9
Fig. 12: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "Self Test".
4. Select "Retrieve CMDTCs".
3. Verify the DTC according to the directions on the M-MDS screen.
4. Press the clear button on the DTC screen to clear the DTC.
5. Verify that no DTCs are displayed.
KOEO/KOER SELF TEST [MZI-3.7]
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initial screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "PCM".
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "PCM".
3. Select "Self Test".
Fig. 13: Identifying DLC-2
Courtesy of MAZDA MOTORS CORP.
3. Then, select the "KOEO On Demand Self Test" or "KOER On Demand Self Test" and perform
procedures according to directions on the M-MDS screen.
4. Verify the DTC according to the directions on the M-MDS screen.
2008 Mazda CX-9 Grand Touring