Mazda CX-9 Grand Touring 2009 Manual page 346

2008 TRANSMISSION Automatic Transaxle (AW6A-EL, AW6AX-EL) - Mazda CX-9
9. Measure the resistance between the coupler component terminals B7 and B8.
If there is any malfunction, replace the TFT sensor. (See TRANSAXLE FLUID
TEMPERATURE (TFT) SENSOR REMOVAL/INSTALLATION [AW6A-EL, AW6AX-
EL].)
Transaxle fluid temperature (TFT) sensor
RESISTANCE REFERENCE
ATF temperature (°C {°F}) Resistance (kilohm)
10 {50}
25 {77}
110 {230}
10. Install the TFT sensor. (See TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR
REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
11. Install the control valve body. (See CONTROL VALVE BODY REMOVAL/INSTALLATION
[AW6A-EL, AW6AX-EL].)
Fig. 13: Measuring Resistance Between Coupler Component Terminals B7 & B8
Courtesy of MAZDA MOTORS CORP.
12. Install the oil pipe. (See OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
13. Install the oil cooler. (See OIL COOLER REMOVAL/INSTALLATION [AW6A-EL, AW6AX-EL].)
14. Add ATF to the specified level. (See AUTOMATIC TRANSAXLE FLUID (ATF) REPLACEMENT
[AW6A-EL, AW6AX-EL].)
15. Install the air cleaner component. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.7] .)
16. Connect the negative battery cable.
TRANSAXLE FLUID TEMPERATURE (TFT) SENSOR
2008 Mazda CX-9 Grand Touring
5.62-7.31
Approx. 3.5
0.22-0.27