Change 5; Change 4; Change 3; Change 2 - Keysight E4980A User Manual

Manual Changes
Manual Changes

Change 5

The following function and SCPI commands are supported.
Current Bias Interface is supported.
o
:SYSTem:COMMunicate:LAN[:SELF]:RESTart command is available to
o
restart the network.
:SYSTem:RESTart command is available to reboot the instrument
o
immediately.

Change 4

The following options are newly added to the firmware revision A.03.00.
Option 030, 050, 100 and 200
o

Change 3

The following functions are newly added to the firmware revision A.02.11.
Change the resolution to 20mA from 1A to 2A of the DC bias signal current
o
level at the connection of two 42841A devices.

Change 2

The following functions are newly added to the firmware revision A.02.10.
Command to set the DC bias range has been added.
o
The firmware revision A.02.00 and below does not support the following SCPI
command. Please delete the descriptions about this command from this
manual.
— ":BIAS:RANGe:AUTO" on page 323

Change 1

The following functions are newly added to the firmware revision A.02.00.
New softkey which has LAN reset function.
o
Compliant with LXI (Lan eXtensions for Instrumentation) standard Class C
o
DHCP ON/OFF function and AUTO IP address ON/OFF function integrated
o
(IP CONFIG field).
"Status" which displays the LAN connection status changed (CURRENT
o
LAN STATUS monitor).
-424 Keysight E4980A/AL User's Guide