SCPI Command Reference
E4980A/AL commands
:SYSTem:BEEPer[:IMMediate]
Syntax
:SYSTem:BEEPer[:IMMediate]
Description
Produces a beep sound. Even if the beep sound is disabled by the
:SYSTem:BEEPer:STATe
Equivalent key
No equivalent key is available on the front panel.
:SYSTem:BEEPer:STATe
Syntax
:SYSTem:BEEPer:STATe {ON|OFF|1|0}
:SYSTem:BEEPer:STATe?
Description
Enables a beep sound.
Parameter
ON or 1
OFF or 0 (Preset value)
Equivalent key
[System] - SYSTEM CONFIG - BEEPER ENABLED - ON
[System] - SYSTEM CONFIG - BEEPER ENABLED - OFF
:SYSTem:BEEPer:TONE
Syntax
:SYSTem:BEEPer:TONE <numeric>
:SYSTem:BEEPer:TONE?
Description
Selects a beep sound tone.
Parameter
Range
Preset value
Resolution
Equivalent key
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 1
[System] - SYSTEM CONFIG - BEEPER TONE - TONE 2
Keysight E4980A/AL Precision LCR Meter
command, a beep sound is still produced. (No Query)
Description
Enables a beep sound
Disables a beep sound
<Numeric>
1 to 5
3
1
365