Scanner Interface; Monitor Information - Keysight E4980A User Manual

System Configurations
SYSTEM INFO Page

Scanner Interface

Functional Description
When equipped with Option 301 Scanner Interface, the E4980A/AL supports
multi-channel correction. The 14-contact Amphenol connector on the rear
panel is used to connect the interface, through which control output signals
and multi-channel correction channel selector signals are communicated.
For more information on available options, see
Interface," on page
When the E4980A/AL is not equipped with the Scanner Interface, the
SCANNER I/F field shows a "NOT INSTALLED" message and the ON/OFF
settings are not available.
Softkey
ON
OFF

Monitor Information

The SYSTEM INFO page displays the following monitor information. None of
this information can be edited on the SYSTEM INFO page.
Monitor
Information
MODEL No.
SER No.
FW VER
FW DATE
OPTION
MAC ADDR
USB ID
Keysight E4980A/AL Precision LCR Meter
483.
Description
Turns ON the scanner interface feature.
Turns OFF the scanner interface feature.
Description
Displays the model number, i.e. E4980A/AL.
Displays the serial number of the instrument.
Displays the version of the firmware installed in the instrument.
Displays the date of the instrument's most recent update.
Displays the option number of any option installed in the instrument.
Displays the MAC address.
Displays the USB address.
Appendix F , "Scanner
153