A.manual Changes - Keysight E4980A User Manual

Keysight E4980A/AL
Precision LCR Meter
User's Guide
A Manual Changes
This appendix shows manual changes that need to be made to an earlier
revision according to firmware or serial number.
Manual Changes
If your E4980A/AL has the firmware or serial number shown in
Table
Table A-1 Manual Changes by Firmware Number
Firmware Number
A.02.00 and later
A.02.10 and later
A.02.11 and later
A.03.00 and later
Table A-2 Manual Changes by Serial Number
Serial Number
MY464/SG464 and below for E4980A
MY542/SG542 and below for E4980AL
The ten-character serial number is stamped on the serial number plate
A-1) on the rear panel.
Figure A-1 Example of Serial Number Plate
A-2, see the corresponding manual changes.
Make Manual Changes
Change 1
Change 2
Change 3
Change 4
Make Manual Changes
Change 5
Keysight E4980A/AL User's Guide-423
Table A-1 and
(Figure