Keysight E4980A User Manual page 161

System Configurations
SYSTEM CONFIG Page
To automatically obtain the IP address:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. When you want to obtain the IP address automatically, select the IP CONFIG
field using the cursor keys and then press the AUTO softkey.
To manually configure the IP address:
Step 1. Press [System].
Step 2. Press the SYSTEM CONFIG softkey.
Step 3. Use the cursor keys to select the IP CONFIG field and then press the MANUAL
softkey.
Step 4. Use the cursor keys to select the MANUAL IP ADDR field.
Step 5. Enter the IP address using the entry keys.
Example: 192.168.10.1
Step 6. Press the ENTER softkey.
Step 7. Use the cursor keys to select the MANUAL SUBNET MASK field.
Step 8. Enter the subnet mask using the entry keys.
Step 9. Press the ENTER softkey.
Step 10. Use the cursor keys to select the MANUAL GATEWAY field.
Step 11. Enter the gateway using the entry keys.
Step 12. Press the ENTER softkey.
Checking the LAN connection status
You can check the CURRECT LAN STATUS monitor area to see the LAN
connection status of the E4980A/AL. The status is expressed as one of the
following:
Table 5-2 LAN connection status
Status
NORMAL
FAULT
---
Keysight E4980A/AL Precision LCR Meter
Description
LAN connection is OK.
Disconnected from the LAN or LAN connection has failed.
LAN connection is being initialized.
161