Voltage[:Level] - Keysight E4980A User Manual

Precision lcr meter

Hide thumbs Also See for E4980A:

Table of Contents

SCPI Command Reference

E4980A/AL commands

:VOLTage[:LEVel]

:VOLTage[:LEVel] <numeric>

:VOLTage[:LEVel]?

Sets the voltage level for the measurement signal. If the signal is set by

:CURRent[:LEVel], the query command returns error No. 230.

Preset value

Equivalent key

[Display Format] - MEAS DISPLAY - LEVEL

[Meas Setup] - MEAS SETUP - LEVEL

Keysight E4980A/AL Precision LCR Meter

1. Depending on the DC bias level.

E4980aal E4980al