Keysight E4980A User Manual page 150

Configuring Measurement Conditions (Display and Function Related Settings)
LIST SWEEP SETUP Page
Step 6. Have all sweep points between the start and end points automatically
entered by pressing the appropriate softkey:
Softkey
FILL LINEAR
FILL LOG
If n is not found, calculation is made on the assumption that n=1
represents the minimum value.
If m is not found, calculation is made on the assumption that m=201
represents the maximum value.
150
Description
Linearly enters all sweep points between the start and end points.
Logarithmically enters all sweep points between the start and end
1
points.
1. Available only when using the frequency as the list sweep parameter.
Keysight E4980A/AL Precision LCR Meter