SCPI Command Reference
E4980A/AL commands
CSD
CSQ
CSRS
LPD
LPQ
LPG
LPRP
LPRD
LSD
LSQ
LSRS
LSRD
RX
ZTD
ZTR
GB
YTD
YTR
VDID
Equivalent key
The softkeys of [Display Format] - MEAS DISPLAY - FUNC field
The softkeys of [Meas Setup] - MEAS SETUP - FUNC field
:FUNCtion:SMONitor:IAC[:STATe]
Syntax
:FUNCtion:SMONitor:IAC[:STATe] {ON|OFF|1|0}
:FUNCtion:SMONitor:IAC[:STATe]?
Description
Does nothing. The E4980A/AL always has the AC current-level monitor turned
ON. This function is provided because of its command compatibility with
4284A.
Keysight E4980A/AL Precision LCR Meter
1
1
1. This can be set only when option 001, 030, 050, 100 or 200 is installed.
Description
Sets the Impedance Parameter Type to "Cs-D"
Sets the Impedance Parameter Type to "Cs-Q"
Sets the Impedance Parameter Type to "Cs-Rs"
Sets the Impedance Parameter Type to "Lp-D"
Sets the Impedance Parameter Type to "Lp-Q"
Sets the Impedance Parameter Type to "Lp-G"
Sets the Impedance Parameter Type to "Lp-Rp"
Sets the Impedance Parameter Type to "Lp-Rdc"
Sets the Impedance Parameter Type to "Ls-D
Sets the Impedance Parameter Type to 'Ls-Q'
Sets the Impedance Parameter Type to "Ls-Rs"
Sets the Impedance Parameter Type to "Ls-Rdc"
Sets the Impedance Parameter Type to "R-X"
Sets the Impedance Parameter Type to "Z-thd"
Sets the Impedance Parameter Type to "Z-thr"
Sets the Impedance Parameter Type to "G-B"
Sets the Impedance Parameter Type to "Y-thd"
Sets the Impedance Parameter Type to "Y-thr"
Sets the Impedance Parameter Type to "Vdc-Idc"
349