Lan Remote Control System; System Configuration - Keysight E4980A User Manual

Overview of Remote Control

LAN remote control system

Setting the GPIB address of the E4980A/AL
[System] - SYSTEM CONFIG - GPIB ADDR
LAN remote control system
The LAN (Local Area Network) remote control system provides two methods:
controlling the E4980A/AL using the SICL-LAN server and controlling the
E4980A/AL using the telnet server.

System configuration

Use a LAN cable to connect the E4980A/AL to the external controller
(computer).
configuration.
Figure 8-2 Configuration of the LAN remote control system
Required Equipment
1. E4980A/AL
2. External controller (personal computer or workstation that can be
3. Other devices (other instruments and/or peripherals that serve your
4. LAN cable for connecting the E4980A/AL with the external controller
224
Figure 8-2 shows an overview of the LAN remote control system's
E4980A
20 Hz - 2 MHz
Preset Precision LCR Meter
7 8 9
DC DC
Source Bias USB
Trigger 4 5 6
1 2 3
UNKNOWN
DC Bias .
0
Display Meas Discharge test device before connecting
Format Setup 42V Peak Max Output CAT I
DC
Source CUR L L POT H POT H CUR
DC Source
Return (Option 001)
10VDC Max
Save/ Local/
Recall A Recall B Recall System Lock
connected to a LAN and with Keysight I/O Libraries Suite installed)
purpose)
Keysight E4980A/AL Precision LCR Meter